Users Guide

route-map map-
name
(OPTIONAL) If you do not enter the route-map argument, all
routes are redistributed. If a map-name value is not specified, no
routes are imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information
To redistribute a default route (0.0.0.0/0), configure the default-information
originate command.
Changing or disabling a keyword in this command does not affect the state of the other
command keywords.
When an LSP with an internal metric is received, the Dell Networking OS considers the
route cost while considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out
command to ensure that the routes are properly passed to the receiving routing
protocol.
Intermediate System to Intermediate System (IS-IS) 1157