Users Guide

Version Description
8.3.11.1 Introduced on the Z9000.
Usage Information Although the passive interface does not send nor receive routing updates, the network
on that interface is still included in the IS-IS updates sent using other interfaces.
redistribute
Redistribute routes from one routing domain to another routing domain.
Syntax
redistribute {static | connected | rip} [level-1 | level-1-2 |
level-2] [metric metric-value] [metric-type {external | internal}]
[route-map map-name]
To end redistribution or disable any of the specified keywords, use the no
redistribute {static | connected | rip} [metric metric-value]
[metric-type {external | internal}] [level-1 | level-1-2 |
level-2] [route-map map-name] command.
Parameters
connected Enter the keyword connected to redistribute active routes into
IS-IS.
rip Enter the keyword rip to redistribute RIP routes into IS-IS.
static Enter the keyword static to redistribute user-configured
routes into IS-IS.
metric metric-
value
(OPTIONAL) Assign a value to the redistributed route. The range
is from 0 to 16777215. The default is 0. Use a value that is
consistent with the destination protocol.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default
route advertised into a routing domain. Specify one of the
following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes. This setting is the default.
Intermediate System to Intermediate System (IS-IS) 1156