Users Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Hello PDUs are “padded” only when both the global and interface padding options are
ON. Turning either one OFF disables padding for the corresponding interface.
Related
Commands
• hello padding — turn ON or OFF padding for LAN and point-to-point hello PDUs.
isis ipv6 metric
Assign metric to an interface for use with IPv6 information.
Syntax
isis ipv6 metric default-metric [level-1 | level-2]
To return to the default values, use the no ipv6 isis metric [default-metric]
[level-1 | level-2] command.
Parameters
default-metric Metric assigned to the link and used to calculate the cost from
each other router via the links in the network to other
destinations. You can configure this metric for Level 1 or Level 2
routing. The range is from 0 to 16777215. The default is 10.
level-1 (OPTIONAL) Enter the keywords level-1 to configure the
shortest path first (SPF) calculation for Level 1 (intra-area)
routing. This value is the default.
level-2 (OPTIONAL) Enter the keywords level-2 to configure the SPF
calculation for Level 2 (inter-area) routing.
Defaults default-metric = 10; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Intermediate System to Intermediate System (IS-IS) 1138