Users Guide

• router isis — enable the IS-IS routing protocol.
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag (OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not specified.
The tag name must be unique for all IP router processes for a
given router.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History s
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced on the E-Series.
Usage Information
Configure a network entity title (the net command) to specify the area address and the
router system ID.
To establish adjacencies and establish dynamic routing, enable routing on one or more
interfaces.
Intermediate System to Intermediate System (IS-IS) 1132