Users Guide

Version Description
8.3.1.0 Introduced on the E-Series.
Usage Information
The running router sets the remaining time value to the current adjacency hold time.
You can override this setting by implementing this command.
Override the default restart-wait time by entering the no graceful-restart
restart-wait command. When you disable restart-wait, the current adjacency
hold time is used.
Set the t3 timer to adjacency on the restarting router when implementing this
command. The restarting router gets the remaining time value from its peer and adjusts
its T3 value so only when you have configured graceful-restart t3 adjacency.
Related
Commands
• graceful-restart restart-wait — enable the graceful restart maximum wait time
before a restarting peer comes up.
hello padding
Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON or
OFF for LAN or point-to-point hello PDUs.
Syntax
hello padding [multi-point | point-to-point]
To return to the default, use the no hello padding [multi-point | point-to-
point] command.
Parameters
multi-point (OPTIONAL) Enter the keywords multi-point to pad only LAN
hello PDUs.
point-to-point (OPTIONAL) Enter the keywords point-to-point to pad only
point-to-point PDUs.
Defaults Both LAN and point-to-point hello PDUs are padded.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Intermediate System to Intermediate System (IS-IS) 1128