Users Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
debug isis update-packets
Enable debugging on link state PDUs (LSPs) that a router detects.
Syntax
debug isis [vrf vrf-name] update-packets [interface]
To turn off debugging, use the no debug isis update-packets [interface]
command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to enable the debugging information on IS-IS. This
information contains updates from neighbors tied to the VRF
that you specify. This command displays the debugging details
of the received LSPs from the neighbors.
interface (OPTIONAL) Identifies the interface type and the interface
information:
Intermediate System to Intermediate System (IS-IS) 1113