Users Guide

Version Description
8.3.7.1 Introduced on the S4810.
Usage Information
CAUTION: Use caution when you enter this command. Back up your
configuration prior to using this command or your IS-IS configuration will be
erased.
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
Syntax
clear isis [vrf vrf-name] [tag] {* | database | traffic}
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to restart the IS-IS process corresponding to that VRF.
tag (Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
* Enter the keyword * to clear all IS-IS information and restart the
IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full SPF
calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Intermediate System to Intermediate System (IS-IS) 1106