Users Guide

Version Description
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Version 6.3.1.0 Introduced
Usage Information
You cannot disable leaking from Level 1 to Level 2. Also, you cannot enable leaking
from Level 2 to Level 1. However, you can regulate the rate flow from one level to
another using an IP Prefix list. If you do not configure the IP Prefix list, all Level 1 routes
are leaked.
You can find more information in IETF RFC 2966, Domain-wide Prefix Distribution with
Two-Level IS-IS.
area-password
Configure a hash message authentication code (HMAC) password for an area.
Syntax
area-password [hmac-md5 | encryption-type] password
To delete a password, use the no area-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter a 1 to 16-character length alphanumeric string to prevent
unauthorized access or incorrect routing information corrupting
the link state database. The password is processed as plain text,
which only provides limited security.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Intermediate System to Intermediate System (IS-IS) 1104