Users Guide

Version Description
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Example
Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage Information
Only sessions the switch observes are learned; sessions flowing through an adjacent
switch are not learned.
After the switch is reloaded, any information exchanged during the initial handshake is
not available. If the switch picks up the communication after reloading, it would detect
a session was in progress but could not obtain complete information for it. Any
incomplete information of this type would not be available in the show commands.
Related
Commands
• show iscsi — display the currently configured iSCSI settings.
• show iscsi session detailed — display detailed information about active iSCSI
sessions on the switch.
• show run iscsi — show run iscsi.
show iscsi session detailed
Display detailed information on active iSCSI sessions on the switch.
Syntax
show iscsi session detailed [session isid]
Parameters
isid Enter the session’s iSCSi ID to display detailed information about
the specified iSCSi session.
Command Modes
• EXEC
• EXEC Privilege
iSCSI Optimization 1097