Users Guide

Parameters
tcp-
port-2...tcpport-
16
Enter the tcp-port number of the iSCSI target ports. The tcp-
port-n is the TCP port number or a list of TCP port numbers on
which the iSCSI target listens to requests. Separate port numbers
with a comma. The default is
860, 3260.
ip-address
(Optional)
Enter the ip-address that the iSCSI monitors. The ip-address
specifies the IP address of the iSCSI target.
Defaults 860, 3260
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage Information
You can configure up to 16 target TCP ports on the switch in one command or multiple
commands.
When you use the no iscsi target port command and the TCP port you wish to
delete is one bound to a specific IP address, the IP address value must be included in
the command.
show iscsi
Display the currently configured iSCSI settings.
Syntax
show iscsi
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
iSCSI Optimization 1095