Users Guide

Default 100
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
• ipv6 flowlabel-zero — configure IPv6 address auto-configuration for the
management interface.
show ipv6 fib stack-unit
View all FIB entries.
Syntax
show ipv6 fib [vrf vrf-name] stack-unit unit-number [summary |
ipv6-address]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to display neighbors corresponding to that VRF.
slot-number Enter the number of the stack unit.
summary (OPTIONAL) Enter the keyword summary to view a summary of
entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is from /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Basics 1079