Users Guide

NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage Information
NOTE: If a route has a mask greater than 64, no output is displayed and no
output is displayed for show ipv6 cam stack-unit unit-number port-
set {0-1} ipv6-address, but an equivalent /64 entry would be listed in the
show ipv6 cam stack-unit unit-number port-set {0-1} output.
Similarly, if there is more than one ECMP object with a destination route that has
a mask greater than 64, if the first 64 bits in the destination routes of the ECMP
objects are the same, only one route is installed in CAM even though multiple
ECMP path entries exist.
NOTE: The self address is displayed in the neighbor portion for the show ipv6
cam stack-unit unit-number port-set command.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
Syntax
show ipv6 control-plane icmp
IPv6 Basics 1078