Users Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
ipv6 nd dns-server
Configures Recursive DNS Server (RDNSS) addresses to be distributed via IPv6 router advertisements to an
IPv6 device.
Syntax
ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}
To remove the IPv6 RDSS configuration, use no ipv6 nd dns-server {ipv6-
RDNSS-address} {lifetime | infinite}
Parameters
ipv6-RDNSS-
address
Enter the IPv6 Recursive DNS Server’s (RDNSS) address. You can
specify up to 4 IPv6 RDNSS server addresses.
lifetime Enter the lifetime in seconds. The amount of time the IPv6 host
can use the IPv6 RDNSS address for name resolution. The range
is 0 to 4294967295 seconds. When you specify the maximum
lifetime value of 4294967295 or infinite, the lifetime does
not expire. A value of
0 indicates to the host that the RDNSS
address should not be used. You must specify a lifetime using
the lifetime or infinite parameter.
infinite Enter the keyword infinite to specify that the RDNSS lifetime
does not expire.
Defaults Not Configured
Command Modes INTERFACE CONFIG
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
IPv6 Basics 1071