Users Guide

no message of the day banner is configured, the login banner and prompt appear. After

the user has logged in, the banner EXEC (if configured) displays.

Commands

• banner exec — enables the display of a text string when you enter EXEC mode.

• banner login — sets a banner to display after successful login to the system.

cam-acl

Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.

Syntax

cam-acl {default | l2acl number ipv4acl number ipv6acl number

ipv4qos number l2qos number l2pt number ipmacacl number [vman-qos

| vman-dual-qos] number ecfmacl number {fcoeacl number}

{iscsioptacl {0|2}} {openflow {4|8}}

Parameters

default Use the default CAM profile settings and set the CAM as follows:

• L2Acl : 2

• Ipv4Acl : 2

• Ipv6Acl : 0

• Ipv4Qos : 2

• L2Qos : 2

• L2PT : 0

• IpMacAcl : 1

• VmanQos : 0

• EtsAcl : 0

• FcoeAcl : 0

• iscsiOptAcl : 0

• ipv4pbr : 0

• vrfv4Acl : 0

• Openflow : 0

• fedgovacl : 0

• nlbclusteracl: 0

Allocate space to each CAM region.

Enter the CAM profile name then the amount of CAM space to

be allotted. The total space allocated must equal to 13. The

ipv6acl range must be a factor of 2.

Control and Monitoring 107