Users Guide

clear ipv6 fib
Clear (refresh) all forwarding information base (FIB) entries on a stack unit.
Syntax
clear ipv6 fib [vrf vrf-name]| stack-unit unit-number
Parameters
vrf vrf–name (Optional) Enter the keyword vrf followed by the name of the
VRF to clear the neighbor corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are cleared.
slot Enter the slot number to clear the FIB.
unit-number Enter the stack member number. The range is from 1to 6
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
IPv6 Basics 1060