Users Guide

Dell#show cam-acl
Related
Commands
• cam-acl — configure CAM profiles to support IPv6 ACLs.
show cam-acl
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
8.4.2.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series.
Example
show cam-acl (non default)
Dell(conf)# cam-acl l2acl 2 ipv4acl 4 ipv6acl 4 ipv4qos 2 l2qos 1
l2pt 0 ipmacacl 0 vman-qos 0 ecfmacl 0
Dell#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
IPv6 Access Control Lists (IPv6 ACLs) 1049