Users Guide

Press RETURN to get started.
2d18h2m: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful on
console
This is the banner
Dell>
Related
Commands
• line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a message of the day banner to appear after logging on to the system.
Syntax
banner login {keyboard-interactive | c line c}
Enter no banner login to delete the banner text. Enter no banner login
keyboard-interactive to automatically go to the banner message prompt (does
not require a carriage return).
Parameters
keyboard-
interactive
Enter the keyboard-interactive keyword and then press
Enter (carriage return) to retrieve the message banner prompt.
c Enter a delineator character to specify the start and end of the
text banner. You cannot use the delineator character in the
banner message.
line Enter text string for your text banner message, with a maximum
of 50 lines and up to 255 characters per line.
Defaults No banner is configured and a carriage return (CR) is required when creating a banner.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Control and Monitoring 104