Users Guide

TenGigabitEthernet 1/2 unassigned NO Manual administratively
down down
TenGigabitEthernet 1/3 unassigned YES Manual
up up
TenGigabitEthernet 1/4 unassigned YES Manual
up up
TenGigabitEthernet 1/5 unassigned YES Manual
up up
TenGigabitEthernet 1/6 10.10.10.1 YES Manual
up up
TenGigabitEthernet 1/7 unassigned NO Manual administratively
down down
show ip management-route
View the IP addresses assigned to the Management interface.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
all (OPTIONAL) Enter the keyword all to view all IP addresses
assigned to all Management interfaces on the switch.
connected (OPTIONAL) Enter the keyword connected to view only routes
directly connected to the Management interface.
summary (OPTIONAL) Enter the keyword summary to view a table listing
the number of active and non-active routes and their sources.
static (OPTIONAL) Enter the keyword static to view non-active
routes also.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
IPv4 Routing 1029