Users Guide

NOTE: Use this attribute to start a BGP instance for either
a specific address family corresponding to the default
VRF or an IPv4 address family corresponding to a non-
default VRF.
interface interface (OPTIONAL) Enter the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For the Management interface on the stack-unit, enter the
keyword ManagementEthernet then the slot/port
information.
• For a port channel interface, enter the keywords port-
channel
then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip then an IP address in the
dotted decimal format. Enter the optional IP address mask in the
slash prefix format (/ x).
inspection Enter the keyword inspection with one of the following
keywords to view ARP entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
macaddress mac-
address mask
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional MAC
address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries entered
manually.
retries (OPTIONAL) Enter the keyword retries to show the number of
ARP retries before a 20–second back off.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of
ARP entries.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
IPv4 Routing 1014