Users Guide

Control and Monitoring
This section contains command information to configure and monitor the system, including Telnet, file
transfer protocol (FTP), and trivial file transfer protocol (TFTP).
asf-mode
Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.
Syntax
asf-mode stack-unit {unit-id | all} queue size
To return to standard Store and Forward mode, use the no asf-mode command.
Parameters
unit-id Enter the stack member unit identifier of the stack member to reset. The range is from 1
to 6.
queue size Enter the queue size of the stack member. The range is from 0 to 15.
unit-id Enter the stack member unit identifier of the stack member to reset. The range is from 1
to 6.
queue size Enter the queue size of the stack member. The range is from 0 to 15.
Defaults
Not configured
Command Modes
CONFIGURATION
4
Control and Monitoring 101