Install Guide
Table Of Contents
- Dell EMC PowerSwitch S4048T-ON Installation Guide March 2021
- About this guide
- The S4048T-ON System
- Site preparations
- NEBS compliance
- S4048T-ON installation
- Power supplies
- Fans
- Management ports
- Specifications
- Dell EMC support
Figure 3. S4048T-ON PSU-side view
1. PSU1
2. Fan modules
3. RS-232/RJ-45 serial console port
4. PSU2
5. 10/100/1000BaseT Ethernet management port
System status
You can view system status information using the light emitting diodes (LEDs).
LED display
The S4048T-ON includes LED displays on both the I/O side and PSU side of the chassis.
For LED information, see your third-party operating software documentation.
LED behavior
The following system LED behavior is seen during open networking installation environment (ONIE) operations:
Figure 4. S4048T-ON I/O -side LEDs
1. 10 GBT—top row port
2. 10 GBT—bottom row port
3. Master LED
4. System LED
5. Power LED
6. Fan status LED
The S4048T-ON System
7