Administrator Guide

The following example shows the show vxlan vxlan-instance statistics interface command.
DellEMC#show vxlan vxlan-instance 1 statistics interface fortyGigE 1/49/1 100
Port : Fo 1/49/1 Vlan : 100
Rx Packets : 13
Rx Bytes : 1317
Tx Packets : 13
Tx Bytes : 1321
The following example shows the show vxlan vxlan-instance physical-locator command.
Instance: 1
Tunnel : count 3
4.3.3.3 : vxlan_over_ipv4 (up)
6.6.6.2 : vxlan_over_ipv4 (up)
6.6.6.3 : vxlan_over_ipv4 (up)
The following example shows the show vxlan vxlan-instance unicast-mac-local command.
DellEMC# show vxlan vxlan-instance <1> unicast-mac-local
Total Local Mac Count: 5
VNI MAC PORT VLAN
4656 00:00:02:00:03:00 Te 0/17 0
4656 00:00:02:00:03:01 Te 0/17 0
4656 00:00:02:00:03:02 Te 0/17 0
4656 00:00:02:00:03:03 Te 0/17 0
4656 00:00:02:00:03:04 Te 0/17 0
The following example shows the show vxlan vxlan-instance unicast-mac-remote command.
DellEMC# show vxlan vxlan-instance <1> unicast-mac-remote
Total Local Mac Count: 1
VNI MAC TUNNEL
4656 00:00:01:00:00:01 36.1.1.1
The following example shows the show vxlan vxlan-instance unicast-mac-remote command when the tunnel is down.
DellEMC# show vxlan vxlan-instance <1> unicast-mac-remote
Total Local Mac Count: 1
VNI MAC TUNNEL
4656 00:00:01:00:00:01 36.1.1.1 (Inactive)
VXLAN Service nodes for BFD
When multiple service nodes are available for a given Logical Network, Network Virtualization Overlay (NVO) gateway picks one of the
service nodes for forwarding Broadcast unknown Unicast and Multicast Traffic (BUM). When one of the service nodes goes down or bfd
is down in that service node, the gateway switches to the alternate service node for Broadcast unknown Unicast and Multicast Traffic
(BUM).
Examples of the show bfd neighbors command.
To verify that the session is established, use the show bfd neighbors command.
Dell_GW1#show bfd neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
Virtual Extensible LAN (VXLAN)
1009