Users Guide

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage Information After entering the banner login command, type one or more spaces and a delineator character. Enter the banner
text then the second delineator character. When the user is connected to the router, if a message of the day
banner is congured, it displays rst. If no message of the day banner is congured, the login banner and prompt
appear. After the user has logged in, the banner EXEC (if congured) displays.
Related Commands
• banner exec — enables the display of a text string when you enter EXEC mode.
• banner login — sets a banner to display after successful login to the system.
cam-acl
Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.
Syntax
cam-acl {default | l2acl number ipv4acl number ipv6acl number ipv4qos number
l2qos number l2pt number ipmacacl number [vman-qos | vman-dual-qos] number
ecfmacl number {fcoeacl number} {iscsioptacl {0|2}} {openflow {4|8}}
Parameters
default Use the default CAM prole settings and set the CAM as follows:
• L2Acl : 6
• IPV4Acl : 4
• IPV6Acl : 0
• IPV4Qos : 2
• L2Qos : 1
• L2PT : 0
• IpMacAcl : 0
• VmanQos : 0
• VmanDualQos : 0
• EcfmAcl : 0
• nlbclusteracl: 0
• FcoeAcl : 0
• iscsiOptAcl : 0
• ipv4pbr : 0
• ipv4udfmirracl: 0
• vrfv4Acl :0
• Openow : 0
• fedgovacl : 0
Allocate space to each CAM region.
Enter the CAM prole name then the amount of CAM space to be allotted. The total
space allocated must equal to 13. The ipv6acl range must be a factor of 2.
Control and Monitoring 99