Users Guide

ipv6-address (OPTIONAL) Enter the forwarding router IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation species successive hexadecimal elds of zeros.
distance (OPTIONAL) Enter a number as the metric distance assigned to the route. The range is
from 1 to 255.
tag value (OPTIONAL) Enter the keyword tag then a tag value number. The range is from 1 to
4294967295.
permanent (OPTIONAL) Enter the keyword permanent to specify that the route is not to be
removed, even if the interface assigned to that route goes down.
NOTE: If you disable the interface with an IPv6 address associated with the
keyword permanent, the route disappears from the routing table.
weight weight-
value
Enter the keyword weight followed by a weight value. The range is from 0 to 255.
NOTE: Weight for a static route can be added only for the destination address
and not for the route pointing to destination a interface.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Also included the weight parameter to support weighted ECMP
feature. Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.2.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
IPv6 Basics 973