Users Guide

Parameters
source address Enter the IPv6 address of the network or host from which the packets were sent in the
x:x:x:x::x format then the prex length in the /x format. The range is from /0 to /128.
The :: notation species successive hexadecimal elds of zero.
mask Enter a network mask in /prex format (/x).
host ipv6-address Enter the keyword host then the IPv6 address of the host in the x:x:x:x::x format. The ::
notation species successive hexadecimal elds of zero.
destination address Enter the IPv6 address of the network or host to which the packets are sent in the
x:x:x:x::x format then the prex length in the /x format. The range is from /0 to /128.
The :: notation species successive hexadecimal elds of zero.
count (OPTIONAL) Enter the keyword count to count packets the lter processes.
byte (OPTIONAL) Enter the keyword byte to count bytes the lter processes.
log (OPTIONAL) Enter the keyword log to have the information kept in an ACL log le.
monitor (OPTIONAL) Enter the keyword monitor to monitor trac on the monitoring interface
specied in the ow-based monitoring session along with the lter operation.
Defaults Not congured.
Command Modes ACCESS-LIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
8.2.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series. Added the monitor option.
IPv6 Access Control Lists (IPv6 ACLs) 951