Users Guide

Control and Monitoring
This section contains command information to congure and monitor the system, including Telnet, le transfer protocol (FTP), and trivial
le transfer protocol (TFTP).
asf-mode
Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.
Syntax
asf-mode stack-unit {unit-id | all} queue size
To return to standard Store and Forward mode, use the no asf-mode command.
Parameters
unit-id
Enter the stack member unit identier of the stack member to reset.
queue size Enter the queue size of the stack member. The range is from 0 to 15.
Defaults
Not congured
Command Modes
CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking OS Command Line
Reference Guide.
Version
Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P1) Introduced on the S3048-ON.
4
94 Control and Monitoring