Dell PowerSwitch S4048-ON : Users Guide : Page 90

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0(0.0) Added support for IPv6 for the file-url parameter.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage Information

RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in square

brackets, [X:X:X:X::X]. For maximum exibility this command accepts IPv6 host addresses with or without the

square brackets.

Reload Dell EMC Networking OS after executing this command. To copy Dell EMC Networking OS from the

management unit to one or more stack members, use the upgrade system stack-unit (S-Series

stack member) command.

Example

DellEMC# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/filepath)

scp: Copy from remote file system (scp://userid:password@hostip/filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

DellEMC# upgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

...........................................................

....................................!

12946259 bytes successfully copied

DellEMC# reload

DellEMC#

upgrade system

Upgrade the Dell EMC Networking OS image. To upgrade the boot ash or boot selector image, use the upgrade boot command.

Syntax

upgrade system {flash: | ftp: | nfsmount: | scp: | stack-unit {stack-unit-id |

all} | tftp: | usbflash:} file-url {A: |B:}

Parameters

system Enter the keyword system to upgrade the operating system (OS) image.

ash: le-url Enter the keyword flash: and specify the location of the image le in the format //

directory-path or press Enter to launch a prompt sequence.

90 File Management