Users Guide

support-
assist
for the current SupportAssist conguration
tacacs+
for the current TACACS+ conguration
tftp
for the current TFTP conguration
trace-group
for the current trace-group conguration
trace-list
for the current trace-list conguration
uplink-state-
group
for the uplink state group conguration
users
for the current users conguration
vlt
for the current VLT conguration
wred-profile
for the current wred-prole conguration
congured (OPTIONAL) Enter the keyword configuration to display line card interfaces with
non-default congurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
conguration and the start-up conguration.
compressed (Optional) Enter the keyword compressed to display the compressed group
conguration. Displays the compressed conguration by grouping all similar congurations.
The compression is done only for interface related congurations.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Added support for the tunnel and EIS interface types.
9.0.0.0 Added support for the VLT option.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
File Management 85