Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series. Prior to the release, 2094 was
supported.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Updated the denition of the learning-limit option for clarity.
Example
DellEMC# clear counters
Clear counters on all interfaces [confirm]
DellEMC#
Related Commands
• mac learning-limit — allow aging of MACs even though a learning-limit is congured or disallow station move
on learned MACs.
clear dampening
Clear the dampening counters on all the interfaces or just the specied interface.
Syntax
clear dampening [interface]
Parameters
interface (OPTIONAL) Enter any of the following keywords and the interface information to clear
counters from a specied interface:
• For a Port Channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport[/subport] information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults Without an interface specied, the command clears all interface dampening counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Interfaces 771