Users Guide

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.1(0.0) Introduced on S4810 and Z9000.

8.3.19.0 Introduced on S4820T.

Usage Information Include the colon (:) when entering this command. This command checks the specied ash memory for errors. If

errors are found, the command recommends that you format the ash.

CAUTION: If you elect to format the ash, all les – including the startup conguration le – are lost. If

you do decide to format the specied ash, consider saving the running conguration as the startup

conguration after formatting the ash (use the write memory command or copy running-

config startup-config command).

Related Commands

• copy — copy one le to another location.

• show le-systems — display information about the le systems on the system.

mkdir

Creates a directory on the NFS mounted le system.

Syntax

mkdir nfsmount://mount-point/usrname

Command Modes CONFIGURATION