Users Guide
p-snooping port-mode fcoe-trusted
Congure the port for bridge-to-bridge links. It is not recommended to use this command because multi-hop FSB is not supported.
Syntax
fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link conguration from the port, use the no fip-snooping port-mode
fcoe-trusted command.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) This command is deprecated.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage Information
NOTE: This command is deprecated from the Dell EMC Networking OS.
show p-snooping cong
Display the FIP snooping status and congured FC-MAP values.
Syntax
show fip-snooping config
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
FIP Snooping 697