Users Guide
Version Description
7.2.1.0 Introduced on the C-Series and S-Series.
ipv6 dhcp snooping verify mac-address
Congure to enable verify source mac-address against ipv6 DHCP packet mac address.
Syntax
[no] ipv6 dhcp snooping verify mac-address
To disable verify source mac-address against IPv6 DHCP packet MAC address, use the no ipv6 dhcp
snooping verify mac-address command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
ip helper-address
Congures the destination broadcast address or the host address for DHCP server requests.
Syntax
ip helper-address [vrf vrf-name] ip-address
To disable the destination broadcast address or the host address for DHCP server requests, use the ip helper-
address [vrf vrf-name] ip-address command.
Parameters
vrf vrf-name (Optional) Enter the keyword vrf and then the name of the VRF through which the host
address can be reached.
ip-address Enter an IP address through which the host address can be reached.
Default Disabled.
Command Modes INTERFACE
662 Dynamic Host Conguration Protocol (DHCP)