Users Guide

stack-unit Enter the keywords stack-unit to specify the stack unit number.
all Enter the keyword all for all the stack units.
stack-unit-number Enter the stack-unit number. The range is from 1 to 6.
default Enter the keyword default to specify the default Dell EMC Networking OS image.
primary Enter the keyword primary to specify the primary Dell EMC Networking OS image.
secondary Enter the keyword secondary to specify the secondary Dell EMC Networking OS
image.
system: Enter the keyword system: to use the system image le URL (system).
ftp: Enter the keyword FTP: to retrieve the image from an FTP server. ftp://
userid:password@hostip/lepath.
nfsmount Enter the keyword nfsmount: to retrieve the image from a mounted NFS le system.
nfsmount://lepath
system: Enter the keyword system: to retrieve the image from the system.
usbash Enter the keyword usbflash: to retrieve the image from the USB ash memory.
usbash://lename.
tftp: Enter the keyword TFTP: to retrieve the image from a TFTP server. tftp://hostip/
lepath.
A: | B: Enter A: or B: to boot one of the system partitions.
bmp-boot Enter the keywords bmp-boot to boot the system from the image present in the DHCP
oer.
NOTE: In normal-reload, this keyword is not enabled.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced the support for bmp-boot on the S-Series and Z-Series switches.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
File Management 63