Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000, S6000-ON, and Z9500 switch..
Usage Information This command takes eect only after reboot.
Related Commands show hardware forwarding-table mode — displays the hardware forwarding table mode in the current boot and in
the next boot.
show hardware forwarding-table mode
Display the hardware forwarding table mode in the current boot and in the next boot.
Syntax
show hardware forwarding-table mode
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000, S6000-ON, and Z9500 switch.
Example
DellEMC#show hardware forwarding-table mode
Current Settings Next Boot Settings
Mode : Default scaled-l3-hosts
L2 MAC Entries : 160K 96K
L3 Host Entries : 144K 208K
L3 Route Entries : 16K 16K
DellEMC#
Related Commands hardware forwarding-table mode — selects the mode to initialize the maximum scalability size for L2 MAC table or
L3 Host table or L3 Route table.
540 Content Addressable Memory (CAM)