Users Guide

Openflow : 0
fedgovacl : 0
nlbclusteracl: 0
DellEMC#
Example (When the
IPv4 QoS and IPv6
ACL optimization is
enabled)
DellEMC#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
1 block = 256 entries
Double Wide Regions: L2Acl, Ipv4Acl, Ipv4Qos, L2Qos, L2PT
: FcoeAcl, ipv4pbr, vrfv4Acl, IPV6Acl,
IPV6(IPV4QOS)
Triple Wide Regions: VmanQos, Openflow, ipv4udfmirracl
L2Acl : 2
Ipv4Acl : 4
Ipv6Acl* : 2
Ipv4Qos* : 0
L2Qos : 2
L2PT : 0
IpMacAcl : 1
VmanQos : 0
EcfmAcl : 0
EtsAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl : 0
ipv4udfmirracl: 0
ipv4mirracl : 0
* - shared regions
show cam-usage
Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL, Layer 3 ACL, and IPv4Flow)
Syntax
show cam-usage [acl | router | switch]
Parameters
acl (OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3 ACL CAM usage.
router (OPTIONAL) Enter the keyword router to display Layer 3 CAM usage.
switch (OPTIONAL) Enter the keyword switch to display Layer 2 CAM usage.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.14(0.0) Updated to display IPv6 ow-based mirroring information on the S5048F-ON, S6100–
ON, Z9100–ON, S6000, and S6000–ON. Updated to display the shared region between
IPv4 QoS and IPv6 ACL entries on the S5048F–ON, S6100–ON, and Z9100–ON.
9.12(1.0) Introduced on the S5048F–ON.
9.11(2.0P1) Optimized the ACL lters to support more than 200 egress ACL rules on the S6000,
S6000–ON, S6100–ON, Z9100–ON.
536 Content Addressable Memory (CAM)