Users Guide

number} [iscsioptacl number] [ipv4udfmirracl number] [ipv4mirracl number]]
[vrfv4acl number]
Parameters
default Use the default CAM prole settings and set the CAM as follows:
• L2Acl : 6
• IPV4Acl : 4
• IPV6Acl : 0
• IPV4Qos : 2
• L2Qos : 1
• L2PT : 0
• IpMacAcl : 0
• VmanQos : 0
• VmanDualQos : 0
• EcfmAcl : 0
• nlbclusteracl: 0
• FcoeAcl : 0
• iscsiOptAcl : 0
• ipv4pbr : 0
• ipv4udfmirracl: 0
• vrfv4Acl :0
• Openow : 0
• fedgovacl : 0
l2acl
number Enter the keyword l2acl and then the number of l2acl blocks. The range is from 1 to 8.
ipv4acl number Enter the keyword ipv4acl and then the number of FP blocks for IPv4 ACL. The range
is from 0 to 8.
ipv6acl number Enter the keyword ipv6acl and then the number of FP blocks for IPv6 ACL. The range
is from 0 to 4.
ipv4qos number Enter the keyword ipv4qos and then the number of FP blocks for IPv4 QoS. The range
is from 0 to 8.
l2qos number Enter the keyword l2qos and then the number of FP blocks for L2 QoS. The range is
from 1 to 8.
l2pt number Enter the keyword l2pt and then the number of FP blocks for l2 protocol tunnelling. The
range is from 0 to 1.
Ipmacacl number Enter the keyword ipmacacl and then the number of FP blocks for IP and MAC ACL.
The range is from 0 to 6.
ecfmacl number Enter the keyword ecfmacacl and then the number of FP blocks for ECFM ACL. The
range is from 0 to 5.
nlbclusteracl
number
Enter the keyword nlbclusteracl and then the number of FP blocks for nlbcluster
ACL. The range is from 0 to 2. By default, the value is 0 and it supports 8 NLB arp entries
reserved for internal functionality.
Content Addressable Memory (CAM) 529