Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information When you create a peer group, it is disabled (Shut mode).
Related Commands
• neighbor peer-group (assigning peers) — assign routers to a peer group.
• neighbor remote-as — assign a indirectly connected AS to a neighbor or peer group.
• neighbor shutdown — disable a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group, that is, the peer group does not send an OPEN message, but responds to one.
Syntax
neighbor peer-group-name peer-group passive [limit sessions]
To delete a passive peer-group, use the no neighbor peer-group-name peer-group passive
command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the peer group.
limit (Optional) Enter the keyword limit to constrain the numbers of sessions for this peer-
group. The range is from 2 to 256. The default is 256.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
452 Border Gateway Protocol