Users Guide

Defaults Disabled.
Command Modes ROUTER BGP
Command History
Version Description
9.10(0.0) Introduced the all keyword on the S4810, S4820, S4048–ON, S3048–ON, S3100
series, S6010–ON, S4040T-ON, S5000, S6000, S6000–ON, S6100–ON, Z9100–ON, and
Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
If you congure the set next-hop command in ROUTE-MAP mode, the conguration takes precedence over
the neighbor next-hop-self command.
If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route reector. If
you use the all keyword, the next hop of both eBGP- and iBGP-learned routes are updated by the route reector.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax
neighbor {ip-address | peer-group-name} password [encryption-type] password
To delete a password, use the no neighbor {ip-address | peer-group-name} password command.
Parameters
ip-address Enter the IP address of the router to be included in the peer group.
peer-group-name Enter the name of a congured peer group.
encryption-type (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means that the
password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The rst character of the password must be
a letter.
You cannot use spaces in the password.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
448 Border Gateway Protocol