Users Guide

Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information If you congure the neighbor maximum-prefix command and the neighbor receives more prexes than the
neighbor maximum-prefix command conguration allows, the neighbor goes down and the show ip bgp
summary
command displays (prfxd) in the State/PfxRcd column for that neighbor. The neighbor remains down
until you enter the clear ip bgp command for the neighbor or the peer group to which the neighbor belongs
or you enter the neighbor shutdown and neighbor no shutdown commands.
Related Commands
• show ip bgp summary — display the current BGP conguration.
neighbor next-hop-self
Allows you to congure the router as the next hop for a BGP neighbor.
Syntax
neighbor {ip-address | peer-group-name} next-hop-self [all]
To return to the default setting, use the no neighbor {ip-address | peer-group-name} next-hop-
self [all] command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
all Species that the route reector is the next hop for both iBGP and eBGP-learned routes.
Border Gateway Protocol 447