Users Guide
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to clear the
ipv6 unicast routes.
ipv4-address mask (OPTIONAL) Enter an IPv4 address in dotted decimal format and the prex mask in slash
format (/x) to clear dampening information only that BGP neighbor.
ipv6–address mask (OPTIONAL) Enter the IPv6 address and the network mask to clear information on IPv6
route dampening.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information After you enter this command, the software deletes the history routes and returns the suppressed routes to the
Active state.
The clear ip bgp dampening command does not clear the history paths.
Border Gateway Protocol 419