Users Guide

Version Description
8.4.1.3 Introduced on the E-Series.
Usage Information
When you explicitly disable a BGP neighbor for a BFD session with the neighbor bfd disable command:
• The neighbor does not inherit the global BFD disable values congured with the bfd neighbor command or
congured for the peer group to which the neighbor belongs.
• The neighbor only inherits the global timer values congured with the bfd neighbor command: interval,
min_rx, and multiplier.
When you remove the Disabled state of a BFD for a BGP session with a specied neighbor by entering the no
neighbor bfd disable
command, the BGP link with the neighbor returns to normal operation and uses the
BFD session parameters globally congured with the bfd neighbor command or congured for the peer group
to which the neighbor belongs.
show bfd neighbors
Display BFD neighbor information on all interfaces or a specied interface.
Syntax
show bfd [vrf vrf name] neighbors [interface] [detail]
Parameters
vrf vrf name (Optional) Enter the keyword vrf and then the name of the VRF to display the BFD
sessions with all neighbors within the VRF.
interface (OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
detail (OPTIONAL) Enter the keyword detail to view detailed information about BFD
neighbors.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(2.1P1) Introduced the vrf keyword on all the remaining Dell EMC Networking OS platforms.
9.10(0.2) Introduced the vrf keyword on the S3048–ON, S4048–ON, S4048T-ON, S6010–ON,
Z9100–ON, and S6100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Bidirectional Forwarding Detection (BFD) 385