Users Guide

Version Description
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information Prex lists redistribute OSPF and RIP routes meeting specic criteria.
Related Commands
• show ip route list — display IP routes in an IP prex list.
• show ip prex-list summary — display a summary of the congured prex lists.
seq
To a deny or permit lter in a prex list while conguring the lter, assign a sequence number.
Syntax
seq sequence-number {deny | permit} {any} | [ip-prefix /nn {ge min-prefix-
length} {le max-prefix-length}] | [bitmask number]
To delete a specic lter, use the no seq sequence-number {deny | permit} {any} | [ip-
prefix {ge min-prefix-length} {le max-prefix-length}] | [bitmask number].
Parameters
sequence-number Enter a number. The range is from 1 to 4294967294.
deny Enter the keyword deny to congure a lter to drop packets meeting this condition..
permit Enter the keyword permit to congure a lter to forward packets meeting this
condition.
any (OPTIONAL) Enter the keyword any to match any packets.
ip-prex /nn (OPTIONAL) Specify an IP prex in the network/length format. For example, 35.0.0.0/8
means match the rst 8 bits of address 35.0.0.0.
ge min-prex-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prex length, which is a
number from zero (0) to 32.
le max-prex-length (OPTIONAL) Enter the keyword le and then enter the maximum prex length, which is a
number from zero (0) to 32.
bitmask number Enter the keyword bitmask then enter a bit mask number in dotted decimal format.
Defaults Not congured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
268 Access Control Lists (ACL)