Users Guide

Version Description
6.2.1.1 Introduced on the E-Series.
Related Commands
• ip prex-list — congure a prex list.
deny
To drop packets meeting the criteria specied, congure a lter.
Syntax
deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a drop lter, use the no deny ip-prefix command.
Parameters
ip-prex Specify an IP prex in the network/length format. For example, 35.0.0.0/ 8 means match
the rst 8 bits of address 35.0.0.0.
ge min-prex-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prex length, which is a
number from zero (0) to 32.
le max-prex-length (OPTIONAL) Enter the keyword le and then enter the maximum prex length, which is a
number from zero (0) to 32.
Defaults Not congured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
266 Access Control Lists (ACL)