Users Guide

1/17 in
Extended mac access-list snickers on TenGigabitEthernet 1/17
seq 10 permit any any ev2 eq 800 count bytes (559851886 packets 191402152148
bytes)
seq 20 permit any any ev2 eq 806 count bytes (74481486 packets 5031686754
bytes)
seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets 797843521 bytes)
Related Commands
• mac access-list standard — congure a standard MAC access list.
• show mac accounting access-list — display MAC access list congurations and counters (if congured).
permit
To pass packets matching the criteria specied, congure a lter.
Syntax
permit {any | host mac-address | mac-source-address mac-source-address-mask}
{any | host mac-address | mac-destination-address mac-destination-address-mask}
[ethertype operator] [count [byte]] | [log] [monitor]
To remove this lter, you have two choices:
• Use the no seq sequence-number command if you know the lter’s sequence number.
•
Use the no permit {any | host mac-address | mac-source-address mac-source-
address-mask} {any | mac-destination-address mac-destination-address-mask}
command.
Parameters
any Enter the keyword any to forward all packets.
host Enter the keyword host then a MAC address to forward packets with that host address.
mac-source-
address
Enter a MAC address in nn:nn:nn:nn:nn:nn format.
mac-source-
address-mask
(OPTIONAL) Specify which bits in the MAC address must match.
The MAC ACL supports an inverse mask; therefore, a mask of ::::: allows entries
that do not match and a mask of 00:00:00:00:00:00 only allows entries that match
exactly.
mac-destination-
address
Enter the destination MAC address and mask in nn:nn:nn:nn:nn:nn format.
mac-destination-
address-mask
Specify which bits in the MAC address must be matched.
The MAC ACL supports an inverse mask; therefore, a mask of ::::: allows entries
that do not match and a mask of 00:00:00:00:00:00 only allows entries that match
exactly.
ethertype operator (OPTIONAL) To lter based on protocol type, enter one of the following Ethertypes:
• ev2 - is the Ethernet II frame format
• llc - is the IEEE 802.3 frame format
• snap - is the IEEE 802.3 SNAP frame format
count (OPTIONAL) Enter the keyword count to count packets the lter processes.
Access Control Lists (ACL) 263