Users Guide

Common MAC Access List Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specic options.
These commands allow you to clear, display, and assign MAC ACL congurations.
The platform supports both Ingress and Egress MAC ACLs.
The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specied rules in the ACL, the trac on the
interface/ VLAN members or Port-channel members will be permitted or denied.
clear counters mac access-group
Clear counters for all or a specic MAC ACL.
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a congured MAC access list.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Access Control Lists (ACL) 249