Users Guide

Version Description
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for the 4-port 40G line cards.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced.
Usage Information
NOTE: The vrf option is available only when VRF feature is enabled.
show ip
accounting
access-lists
Field
Description
“Extended IP...” Displays the name of the IP ACL.
“seq 5...” Displays the lter. If the keywords count or byte were congured in the lter, the
number of packets or bytes the lter processes is displayed at the end of the line.
“order 4” Displays the QoS order of priority for the ACL entry.
Example
DellEMC# show ip accounting access-list L3-ACL vrf vrf3
!
Standard Ingress IP access list L3-ACL on vrf3
Total cam count 3
seq 5 permit 10.1.2.0/24 any negotiate 150 monitor 300 count (0 packets)
seq 10 permit 20.1.2.0/24
seq 15 permit 30.1.2.0/24
DellEMC#
show ip access-lists
Display all of the IP ACLs congured in the system, whether or not they are applied to an interface, and the count of matches/mismatches
against each ACL entry displayed.
Syntax
show ip access-lists [access-list-name] [interface interface] [in | out] [vrf
vrf-name]
Parameters
access-list-name Enter the name of a congured MAC ACL, up to 140 characters.
interface interface Enter the keyword interface followed by the one of the following keywords and slot/
port or number information:
• For a VLAN interface, enter the keyword vlan followed by the slot/port number.
Access Control Lists (ACL) 215