Users Guide
microcode and you congure the VRRP group as 10 in VRF 2, the VRID for the VRRP group is (16 x 10) + 2, or
162. This VRID value is used in the lowest byte of the virtual MAC address of the VRRP group and is also used
for VRF routing.
NOTE: For all routers to interoperate, congure the same VRID on neighboring routers (Dell EMC
Networking or non- Networking) in the same VRRP group.
Related Commands
• virtual-address — assigns up to 12 virtual IP addresses per VRRP group.
2008 Virtual Router Redundancy Protocol (VRRP)