Users Guide

You cannot modify a VXLAN instance mode. If you need to change the mode, you can delete the existing VXLAN
instance and create a new instance with the required mode.
Example
Enable VXLAN instance:
DellEMC(conf)#feature vxlan
DellEMC(conf)#vxlan-instance 1 static
DellEMC(conf-vxlan-inst-1)#no shutdown
Disable VXLAN instance:
DellEMC(conf)#no vxlan-instance 1 static
vxlan-vnid
Associate VNID to VLAN.
Syntax
vxlan-vnid VNID
To remove the association, use the no vxlan-vnid command.
Parameters
VNID Enter the logical network identier.
Defaults None
Command Modes INTERFACE VLAN
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048, S4048T, S6000, S6010, S6100, and Z9100.
Usage Information Use this command to associate a VNID to specic VLAN. Each VLAN is mapped to a single VNID.
show running-cong vxlan
Displays the VXLAN conguration information from running conguration.
Syntax
show running-config vxlan
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
1974 Virtual Extensible LAN (VXLAN)