Users Guide

Parameters
prole name Enter a valid and unique prole name. The prole name can have a maximum of 32
characters.
Defaults None
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information
Use this command to create a VNI prole with a unique prole name to associate with remote VTEP. You can
create a maximum of 1024 VNI proles and remote VTEP IPs.
You can use this command only when you congure static VXLAN.
vxlan-instance static
Enable VXLAN instance conguration to be static on the platform.
Syntax
vxlan-instance instance ID [static]
To delete VXLAN instance from the system, use no vxlan-instance instance ID command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
static Enter the keyword static to set the VXLAN instance in static mode.
Defaults Controller mode.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information
By default, VXLAN instance is created in controller mode. You need a controller to congure VTEP. When you
create VXLAN instance in static mode, you can congure VTEP through CLIs.
Use the no shutdown command to enable the VXLAN instance.
Only one VXLAN instance can exist in a system.
Virtual Extensible LAN (VXLAN) 1973