Users Guide

Example
External Loopback:
DellEMC(conf-if-po-127)#sho c
!
interface Port-channel 127
vxlan-instance 1 loopback
Internal Loopback:
DellEMC(conf-if-te-1/2/2/3)#sho c
!
interface TenGigabitEthernet 1/2/2/3
description connected IXIA card 1 port 14
vxlan-instance 1
Disable VXLAN Instance:
DellEMC(conf)#no vxlan-instance 1
Related Commands feature vxlan — Enable VXLAN conguration globally on the platform.
vnid
Associate a range of VNID numbers to a specic VNI prole.
Syntax
vnid VNID-Range
To remove the association, use the no vnid command.
Parameters
VNID-Range Enter the range of VNIDs that need to be members of the specic VNI prole. The range
is from 1 to 16777215.
Defaults None.
Command Modes VNI-PROFILE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to associate the specied range of VNIDs to a VNI prole.
vni-prole
Create a VNI prole to associate with remote VTEP conguration.
Syntax
vni—profile profile name
To delete the VNI prole, use the no vni-profile command.
1972 Virtual Extensible LAN (VXLAN)